|
| |
Wick trimmer scissor is 7 inches long and made of stainless steel construction with good cutting power for thick wicks. Helps prevent soot buildup on your walls and ceilings and will lengthen the life of your candle by controlling the burn for best scent and minimal soot.
SKU Number: Wick Trimmer
|
|
|
|
|
| |
These MAXI Tealight Cups are larger than the standard tealight cups. Made of clear polycarbonate plastic and has a V-2 heat-resistant rating. They are 2-1/3 inches in diameter and 1 inch high. Can all be used as a no-mess wax melt cup on a wax warmer. Each cup holds 1-1/2 oz of wax which will yield a 10-12 hour burn depending on type of wax used. Available in 25's, 50's and 100's.
SKU Number: MaxiTealight
|
|
|
|
|
| |
(Glass Type) - This economical glass thermometer has a metal scale completely enclosed in glass with easy-to-read numerals and graduations. It is equipped with a 9'' mercury tube & convenient pan clip.
SKU Number: Therm Glass
|
|
|
|
|
| |
A leak-proof, rust-proof, heavy gauge galvanized steel dipping vat that holds approximately 10 pounds of wax (6" size). This dipping vat can be used with our Taper Dipping Frame (rack) to make hand dipped taper candles. Can also be used as a Water Bath Container. (Select from 4" diameter x 15" tall or 6'' diameter x 15'' tall)
SKU Number: Dip Vat
|
|
|
|
|
| |
This seamless aluminum melting pot-pouring pitcher is safe from leakage, easy to pour from and has the capacity for holding approximately 4 pounds of melted wax or melt-n-pour glycerin soap. Easier to use than "Coffee Cans". Made of sturdy, easy-to-clean aluminum with heat resistant plastic handle.
SKU Number: MeltPot Standard
|
|
|
|
|
| |
This seamless aluminum melting pot-pouring pitcher is similar to the standard four pound size. It will hold approximately 1 pound of melted wax or melt-n-pour glycerin soap. Melting pot-pouring pitcher is 5" high and 4 1/2 " in diameter. It is ideal for pouring tea lights and votives when only a small quantity of melted wax is needed.
SKU Number: MeltPot Mini
|
|
|
|
|
| |
This simple dipping device will allow you to dip up to 6 candles at once. Very easy to use...simply attach wick to each end and dip "jig" in tank full of dipping wax. Adjustable for different sizes of dipped candles from 1 inch to 13 inches.
SKU Number: Tapr Dip Frame
|
|
|
|
|
| |
Tea Light Aluminum Containers - Now you can make your own Potpourri or Tea Lite Candles with these aluminum containers (1 1/2 '' diam.x 3/4 '' deep). Available in quantities of 100 or 500. Please refer to Bulk/Wholesale price list for great price on 1000 Tea Light Aluminum Containers.
SKU Number: TeaLightAlum
|
|
|
|
|
| |
These plastic tea light cups are made from a non-combustible plastic polycarbonate material. The cup will not deteriorate from the heat of a candle. Same size as aluminum cups, but more rigid. Does not include wicking or wick tabs. Available in quantities of 100 or 300.
SKU Number: TLight Plastic
|
|
|
|
|
| |
This 6-cavity votive mold strip consists of six standard size seamless votive molds "welded" to a metal strip for easy handling. Standard votive mold is 1 3/4 " in diameter at top, 1 1/2 " in diameter at bottom and is 2" high. Molds are flared at top.
SKU Number: Vot Strip 6
|
|
|
|
|
| |
This mold will produce the finest votive candles, which will fit into all popular votive containers. The finished candles may be used as room scenters, food warmers and patio lights. These molds are made from heavy seamless metal and taper from top to bottom. Top is 1 3/4 '', bottom 1 1/2 '', height 2''. This taper insures easy removal of finished candle from mold. Slightly flared at top.
SKU Number: Met Vot Mold
|
|
|
|
|
| |
Three tin plate round votive molds "welded" to a metal strip for easy handling. Each round votive mold cup is 1-9/16" in diameter by 2" high.
SKU Number: Rnd Vot Mld 3
|
|
|
|
|
| |
Three tin plate square votive molds "welded" to a metal strip for easy handling. Each square tapered votive mold is 1 3/4 " by 1 3/4 " by 2" tall.
SKU Number: Sqr Vot Mld 3
|
|
|
|
|
| |
This unique tool allows you to shave wax from either end of your tapered candles. Reduce the diameter of the candle base or reshape the top of a used taper to restore its beauty.
SKU Number: Candle Shap
|
|
|
|
|
| |
A flexible one foot length of 1/4 '' diameter lead. Used to "weight" metal molds in water bath. Simply wrap the length of lead around the base of the mold.
SKU Number: Mld Wght
|
|
|
|
|
| |
Candles made in this mold can be used to float on water as in a centerpiece, party favors or as wax embedments in larger candles. The molds are seamless and made from heavy gauge tin plate with scalloped edges. They measure 3/4 " deep, 2 1/4 " across top & 1 3/8" across the bottom. Also available in 3-cup and 6-cup strips.
SKU Number: Tart Mld
|
|
|
|
|
| |
These round wick tabs are used to secure wick to bottom of containers or votives. Has been the industry standard for years. It is 15mm in diameter, about the size of dime, with a 3-mm neck. Approximately 1100 tabs per pound.
SKU Number: Wck Tabs 15mm
|
|
|
|
|
| |
These round wick tabs are used to secure wick to bottom of medium to large size container candles. Can also be used for pillars and votives. It is 20mm in diameter, about the size of a nickel, with a 3-mm neck. Approximately 660 tabs per pound.
SKU Number: Wck Tabs 20mm
|
|
|
|
|
| |
These magnetic mold sealers are a lifesaver for the candle maker. Simply thread wick tip through wick hole leaving approximately 1/2 " exposed. Bend this end so that it lies flat and attach magnetic mold sealer making sure the wick is not exposed. Apply pressure to ensure a good seal. Be sure to watch your wax temperature. Wax that is poured too hot may loosen seal. Wipe clean after each use. Available in packs of 6 pieces.
SKU Number: Mag Mld Seal
|
|
|
|
|
| |
Our votive wick pins fit perfectly into our standard 2 oz votive molds. Just place the wick pin in the votive mold, pour your wax and let set up. When the votive comes out of the mold, simply push the wick pin out and replace with your tabbed wick. These wick pins save a tremendous amount of time and effort and as an added bonus, the wicks are always perfectly aligned.
SKU Number: VotWicPins
|
|
|
|
|
| |
A set of 12 - 2 oz standard size seamless metal votive molds with 12 votive wick pins.
SKU Number: VotMldWicPinSet
|
|
|
|
|
| |
These 3/4" wide metal wick bars can be used to hold wick in place in jars as well as candle molds. Available in 4", 5", 6" and 7" lengths and packaged in lots of 6.
SKU Number: MtlWicBars
|
|
|
|
|
| |
These molds are used to make wax tarts, chunks or scent samplers. These molds are made of crystal-clear resilient PVC plastic and can accommodate high fragrance loads and pour temps up to 175 degrees F. Can also be used to make scented soap cubes. Each clamshell unit will hold 2.4 ounces of wax (for all 6 melts) and each cube produced is 1 inch in diameter.
SKU Number: TartClamshell
|
|
|
|
|
| |
These are tapered rubber plugs used to seal the bottom of aluminum and tin-plate metal candle molds. Just fasten wick to top of mold with craft stick or suitable wick bar; pull tight at base and push & twist small end of rubber plug into hole to prevent wax from leaking out of wick hole.
SKU Number: RubberPlugs
|
|
|
|
|
| |
These molds are used to make wax tarts, chunks or scent samplers. These molds are made of crystal-clear resilient PVC plastic and can accommodate high fragrance loads and pour temps up to 175 degrees F. Can also be used to make scented soap cubes. Each clamshell unit will hold 5 ounces of wax (for all 6 melts) and each cube produced is 1-1/2 X 1-1/2 X 7/8 inch in diameter.
SKU Number: TartClamshell
|
|
|
|
|
| |
20 mm size candle wick stickers for use in attaching wick tab assemblies to containers. Available in 100's, 500's, and 1000's.
SKU Number: Cand Wick Stick
|
|
|
|
 "Candle Wick Trimmer Scissor Cutter")
 "MAXI Tealight Cups/Melt Cups - 25, 50 or 100")
 "Dipping Vat (Water Bath Container) 4\" or 6\" Diameter")
 "Melting Pot - Standard")
 "Melting Pot - Mini")
 "Taper Dipping Frame")
 "Tea Light Aluminum Containers - 100 or 500")
 "Tea Light Plastic Containers - 100 or 300")
 "Metal Votive Mold Strip")
 "Metal Votive Molds")
 "Round Votive Mold (3-In-1 Strip)")
 "Square Votive (3-In-1 Strip)")
 "Candle Shaper")
 "Mold Weight")
 "Floater/Tart Candle Mold")
 "Round Wick Tabs (15mm)")
 "Round Wick Tabs (20mm)")
 "Magnetic Mold Sealer")
 "Votive Wick Pins")
 "Votive Mold/Wick Pin Set")
 "Metal Wick Bars")
 "Wax Tart Melt Clamshell Molds - STANDARD SIZE")
 "Rubber Plugs For Sealing Wick Holes")
 "Wax Tart Melt Clamshell Molds - JUMBO SIZE")
 "Candle Wick Stickers")
