|
|
| |
|
Votive Wick Pins
Our votive wick pins fit perfectly into our standard 2 oz votive molds. Just place the wick pin in the votive mold, pour your wax and let set up. When the votive comes out of the mold, simply push the wick pin out and replace with your tabbed wick. These wick pins save a tremendous amount of time and effort and as an added bonus, the wicks are always perfectly aligned.
SKU Number: VotWicPins |
|
|
|
|
|
| |
|
Votive Mold/Wick Pin Set
A set of 12 - 2 oz standard size seamless metal votive molds with 12 votive wick pins.
SKU Number: VotMldWicPinSet |
|
|
|
|
|
| |
|
Metal Wick Bars
These 3/4" wide metal wick bars can be used to hold wick in place in jars as well as candle molds. Available in 4", 5", 6" and 7" lengths and packaged in lots of 6.
SKU Number: MtlWicBars |
|
|
|
|
|
| |
|
Plastic Votive Molds - Smoke Grey Color
Plastic Votive Molds (Smoke Grey Color) made of heat resistant non-toxic polycarbonate plastic material. Molds are 2" in diameter at top, 1-11/16" diameter at base and 2-9/16" high and are slightly larger than the standard metal votive molds. Will hold 2.3 ounces of wax. Will allow you to make votives that will burn for about 17 hours. The polycarbonate plastic molds will also allow you to make votives with a glossier finish than you can with metal molds. Can also be used as a votive holder to burn votives in. Available in 12's, 30's and 60's.
SKU Number: PlastVotMold |
|
|
|
|
|
| |
|
Pillar Wick Pins
These wick pins are used with our seamless aluminum pillar candle molds. The 2" pillar wick pin is 2" in diameter by 7" tall and can be used in 2" pillar molds less than 7" tall. The 3" pillar wick pin is 3" in diameter by 7" tall and can be used in 3" pillar molds less than 7" tall. Just plug the wick hole and drop the auto wick pin into the mold for a perfectly centered hole in your pillar candle. Then all you need to do is insert a pre-tabbed wick into the candle.
SKU Number: PilWicPins |
|
|
|
|
|
| |
|
Wax Tart Melt Clamshell Molds - 25, 50 or 100
These molds are used to make wax tarts, chunks or scent samplers. These molds are made of crystal-clear resilient PVC plastic and can accommodate high fragrance loads and pour temps up to 175 degrees F. Can also be used to make scented soap cubes. Each clamshell unit will hold 3 ounces of wax (for all 6 melts) and each cube produced is 1 inch in diameter.
SKU Number: TartClamshell |
|
|
|
|
|
|
|
|
